:	Jul 21, 2004

.

Raise and support the vehicle.

.

: Before the disconnection or removal of any components, ensure the area around joint faces and connections are clean. Plug any open connections to prevent contamination. Disconnect the battery ground cable.

.

Remove the radiator access panel.   Remove the 4 bolts.

.

Remove the EOP sensor.   Disconnect the electrical connector.   Position a container to collect the fluid.

.

To install, reverse the removal procedure.   Clean the component mating faces.   Tighten the oil pressure sensor to 13 Nm (10 lb.ft).

.

Check and top-up the engine oil.